Member Product Database

Rotary Actuator

DEOS Rotary actuators PWDxx-24-BAC are used for mounting on 2 and 3-way control ball valves or
open/close switching ball valves.
Sensor involvement is included.

The BACnet-actuators dispose of 3 additional analog inputs. Here passive resistance sensors Pt1000,
Ni1000, active 0 ? 10V or digital switch contacts can be connected.

Technical highlights:
? ball valves up to DN 50
? Torque 5 Nm or 10 Nm
? Nominal voltage AC/DC 24 V
? Communication via BACnet MS/TP
? Power consumption approx. 2,5 W
? Maintenance-free

The rotary actuators PWDxx-24-BAC are equipped with a BACnet MS/TP interface as standard. Thereby
the drives can communicate directly over the BACnet protocol to
the other BACnet devices. All settings are possible directly via BACnet protocol. No additional software is
needed for initial operation. The devices have the BACnet Device Profil BACnet Application Specific
Controller (B-ASC). Additionally to the requested
BIBBs also DS-COVU-B is integrated. Therefore the device can unsolicited inform all other participants
about change in values. The setpoint setting 0-100% happens over an analog output object. The current
actual value will be read back by the actuator and will be available via one analog input object. Furthermore
the runtime of the actuator will be calculated.
To extend the functionality of the actuators they are equipped with 3 additional flexible inputs.
As supply voltage 24 V AC or 24 V DC can be used alternatively. Up to 99 devices can be configurated on
BACnet MS/TP bus.

ProfileBACnet Application Specific Controller (B-ASC)
BTL ListedNot BTL Listed






© Copyright 2021 BACnet International. All rights reserved